Yamaha NUAGE, Setup Manual

Page: 55 / 159

55
4-7. Wordclock Connections
Workdclock signals output from the clock master device will need to be distributed to each of the
following digital audio devices
- Nuage I/O
- SyncStation
- Other digital audio devices such as CD player (if needed)
TIPS
：
When multiple Nuage I/O units are used, apply the same wordclock signal to each unit. If that's the
case, choose "BNC IN" as Wordclock Source on the Nuage Workgroup Manager, and also make
sure you turn both "Preferred Master" and "Slave To External Word Clock" on the Dante
Controller's Clock on for only one of the Nuage I/O units, and turn them off for the other units.
TIPS
：
When using multiple Nuage I/Os, simply connecting the Extended System Link output from one of
them to the AES2 input on the SyncStation will provide sample syncing on all the Nuage I/Os. You
can select a channel for the Expanded System Link on the NUENDO’s VST Connections, as
discussed later on, but take special note that under current specifications, this requires that you
select two channels at a time. Also note that because you can use digital channels (two at a time)
patched to Expanded System Link as audio channels, you don’t end up wasting scarce audio
channels, and can use them more efficiently.