172
MOTIF XS6/MOTIF XS7/MOTIF XS8
Checking the written version
1
Turn on the power of the MOTIF XS.
When the screen as in Fig. 1 appears just
after the power is turned on, simultaneously
press and hold the [REC] and [REMOTE]
switches on the panel shown in Fig. 5 until
the screen as in Fig. 6 (Test program start-
up screen) appears.
The way to enter the test program is the same as the
entry method for the
fi
rmware updating except that
the panel switches to be pressed simultaneously are
different.
2
The version will be shown in the entry screen
for the test program. Check the version.
MOTIF XS Firmware Versioin ?.??.?
(Fig. 5)
(Fig. 6)
9
When the verifying check is completed, the
result will be shown as OK or NG. If OK ap-
pears as follows, the writing procedure is
fi nished without any problem.
Verify…
OK
Finish.
Please turn off.
It will take about 15 minutes for the whole updating
procedures.
