Yamaha grizzly 700 Owner'S Manual Download

Page: 110 / 170

8-21

2. Install the rear carrier by installing the bolts

and tightening them to the specified torques.

3. Install the seat.

EBU28671

Removing the radiator grills

The radiator grills can be removed to access the
radiator for cleaning.

To remove a radiator grill

Remove the quick fastener, pull the radiator grill
outward at the top, and then pull it upward.

To install a radiator grill

Place the radiator grill in its original position, and
then install the quick fastener.

Tightening torques:

Carrier bolt (upper):

53 Nm (5.3 m·kgf, 38 ft·lbf)

Carrier bolt (lower):

53 Nm (5.3 m·kgf, 38 ft·lbf)

Carrier bolt (under the fenders):

7 Nm (0.7 m·kgf, 5.1 ft·lbf)

1. Radiator grill

2. Quick fastener

U1DT60E0.book Page 21 Wednesday, March 3, 2010 2:51 PM

Summary of Contents for grizzly 700











































































































































































Search results

Summary of Contents for grizzly 700

Reviews:

Related manuals for grizzly 700

Brands by name

Popular brands

Yamaha grizzly 700, Owner'S Manual

Search results

Summary of Contents for grizzly 700

Reviews:

Related manuals for grizzly 700

Brands by name

Popular brands