INSP
ADJ
IDLING CO. MEASUREMENT AND ADJUSTMENT
IDLING CO. MEASUREMENT AND
ADJUSTMENT
1. Start the Engine and let it warm up by run-
ning the Motorcycle approx. 3~4 kms.
2. Attach :
• Inductive Tachometer to the Spark Plug
Lead.
3. Check :
• Engine idling speed (standard)
Out of specification Ÿ Adjust.
Turn the Throttle Stop Screw ¿ in or out
until specified idling speed is obtained.
NOTE :
Before checking Engine idle RPM always check
throttle cable free movement and free play.
4. Insert :
• Sampling probe ¿ (CO. tester ) to the
exhaust pipe À
Out of specification
Adjust.
3-8
Turning IN
Increase in rpm
Turning OUT
Decrease in rpm
7. Install
• Valve Covers (with O-ring) ¿
• Spark Plug
• Cylinder Head Side Cover À
8. Install
• Seat
• Side Covers
• Fuel Tank
Refer to the “SIDE COVERS, SEAT AND
FUEL TANK” section Page no 3-3
Valve cover (intake and exhaust) :
17.5 Nm (1.75 m kg, 13 ft-lb)
Bolts (cylinder head side cover) :
10 Nm (1.0 m kg, 7.2 ft-lb)
Engine idling speed :
1,300 ~ 1,500 r/min
CO.concentration :
2.5% ± 1.5 V/V
Tachometer :
YSST - 613
¿
À
¿
¿
À
¿
Summary of Contents for Fazer
Page 1: ...SERVICE MANUAL ...
Page 36: ...SPEC ENGINE BEARINGS ENGINE BEARINGS 2 20 ...
Page 186: ...ELEC CIRCUIT DIAGRAM 7 1 ...
