Basic components
29
Pre-operation checks
Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to
“
” (on).After all the displays come on and
the total hour display comes on, the gauge
will change to normal operation. If the buzzer
sounds and the water separator-warning in-
dicator blinks, consult your Yamaha dealer
immediately.
NOTE:
To stop the buzzer, press the “
” (set) or
“
” (mode) button.
Low oil pressure warning
When the engine oil pressure drops too low,
the low oil pressure-warning indicator will
start to blink, and the engine speed will auto-
matically decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-warning in-
dicator blinks. Check the engine oil quantity
and replenish oil if necessary. If the warning
device has activated while the appropriate
engine oil quantity is maintained, consult
your Yamaha dealer.
CAUTION:
ECM01600
Do not continue to run the engine if the
low oil pressure warning device has acti-
vated. Serious engine damage will occur.
Overheat warning
If the engine temperature rises too high while
cruising, the overheat-warning indicator will
start to blink. The engine speed will automat-
ically decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat warning device has
activated. Check the cooling water inlet for
clogging.
CAUTION:
ECM01591
●
Do not continue to run the engine if the
ZMU05430
ZMU05431
ZMU05421
ZMU05422
