Basic components
24
indicator will flash. For further information on
reading the indicator, see page 33.
CAUTION:
ECM00051
Do not continue to run the engine if the
overheat-warning indicator is on. Serious
engine damage will occur.
EMU26582
Overheat-warning indicator (digital
type)
If the engine temperature rises too high, the
warning indicator will start to blink. For fur-
ther information on reading the indicator, see
page 33.
CAUTION:
ECM00051
Do not continue to run the engine if the
overheat-warning indicator is on. Serious
engine damage will occur.
EMU26601
Speedometer (digital type)
This gauge shows the boat speed.
NOTE:
After the main switch is first turned on, all
segments of the display come on as a test.
After a few seconds, the gauge will change
to normal operation. Watch the gauge when
turning on the main switch to make sure all
segments come on.
NOTE:
The speedometer displays km/h, mph, or
knots, according to operator preference. Se-
lect the desired units of measurement by set-
ting the selector switch on the back of the
gauge. See the illustration for settings.
1. Overheat-warning indicator
ZMU04715
ZMU01737
1
1. Speedometer
2. Fuel gauge
3. Trip meter/clock/voltmeter
4. Warning indicator(s)
