Yamaha F30A, Service Manual

Page: 9 / 285

67C3K11
1-4
1
2
3
4
5
6
7
8
9
Safety while working
To prevent an accident or injury and to
ensure quality service, follow the safety pro-
cedures provided below.
Fire prevention
Gasoline is highly flammable.
Keep gasoline and all flammable products
away from heat, sparks, and open flames.
Ventilation
Gasoline vapor and exhaust gas are heavier
than air and extremely poisonous. If inhaled
in large quantities, they may cause loss of
consciousness and death within a short time.
When test running an engine indoors (e.g., in
a water tank), be sure to do so where ade-
quate ventilation can be maintained.
Self-protection
Protect your eyes by wearing safety glasses
or safety goggles during all operations involv-
ing drilling and grinding, or when using an air
compressor.
Protect your hands and feet by wearing pro-
tective gloves and safety shoes when neces-
sary.
Part, lubricant, and sealant
Use only genuine Yamaha parts, lubricants,
and sealants, or those recommended by
Yamaha, when servicing or repairing the out-
board motor.
Under normal conditions, the lubricants men-
tioned in this manual should not harm or be
hazardous to your skin. However, you should
follow these precautions to minimize any risk
when working with lubricants.
1. Avoid contact with skin. Do not, for
example, place a soiled rag in your
pocket.
2. Wash hands and any other part of the
body thoroughly with soap and hot water
after contact with a lubricant or lubricant
soiled clothing has been made.
3. Change and wash clothing as soon as
possible if soiled with lubricants.
4. To protect your skin, apply a protective
cream to your hands before working on
the outboard motor.
5. Keep a supply of clean, lint-free cloths for
wiping up spills, etc.
How to use this manual / Safety while working