Yamaha F30A, Service Manual

Page: 106 / 285

POWR
Power unit
5-11
67C3K11
5. Install the spiral spring
8
into the manual
starter cover
9
.
NOTE:
Hook the end
c
of the spiral spring
8
onto
the cut-out
d
in the manual starter cover
9
.
6. Install the sheave drum
2
into the man-
ual starter cover
9
.
NOTE:
• When installing the sheave drum
2
, set the
spiral spring
8
by turning the drum.
• Hook the end
e
of the spiral spring
8
onto
the cut-out
f
in the sheave drum
2
.
7. Install drive pawl spring 1
=
, the drive
plate
A
, and the bolt
B
.
8. While holding the starter rope
1
, turn the
sheave drum
2
3 turns in the direction of
the arrow shown.
NOTE:
Push the starter plunger
3
in the direction of
the arrow shown while turning the sheave
drum
2
as shown.
9. Remove the starter rope
1
from the
notch
b
, and then fit it into the groove in
the sheave drum
2
.
NOTE:
• Be sure to hold the sheave drum
2
with
your hand so that it turns slowly.
• Allow the spring force to slowly turn the
drum as the starter rope winds around the
drum.
10. Pull the starter handle
7
several times to
check that the sheave drum turns
smoothly and to check the starter rope
for slack. Repeat steps 4–9 if necessary.
NOTE:
Push the starter plunger
3
in the direction of
the arrow shown while pulling the starter han-
dle
7
.
S67C5034
8
9
c
d
S67C5035
2
9
f
e
8
S67C5036
LT
271
0
A
A
B
S67C5037
3
1
b
2
S67C5038
7
3
3