Yamaha F30A, Service Manual

Page: 69 / 285

67C3K11
3-12
1
2
3
4
5
6
7
8
9
Bracket unit
Checking the steering operation (H
model)
NOTE:
Lubricate the swivel bracket before checking
the steering operation.
1. Move the steering lock lever
1
to posi-
tion
a
and check that the steering is
locked.
Move the steering lock lever
1
to posi-
tion
b
and check that the steering oper-
ates smoothly.
2. Adjust the self-locking nut 2 until the
steering operation is proper.
Checking the tilt operation
1. Tilt the outboard motor to the fully up and
fully down positions a few times and
check the entire tilt range for smooth
operation. Check the tilt mechanism (D
model) or PTT fluid level (PTT model) if
necessary.
NOTE:
• To check the tilt operation, see “Checking
the tilt system (D model)” (1-17).
• To check the PTT fluid level, see “Checking
the PTT fluid level” (3-13).
• Be sure to listen to the winding sound of the
PTT motor for smooth operation.
2. Tilt the outboard motor to the fully up
position, and then support it with the tilt
stop lever to check the lock mechanism
of the lever.
Ignition timing at 850 r/min:
ATDC 5
±
2°
S67C3036
a
S67C3037
1
b
a
S67C3038
2
S67C3039
Control system / Bracket unit