Yamaha F2.5C, Service Manual

Page: 146 / 184

BRKT
Bracket unit
7-3
6D55F11
Assembling the tiller handle
1. Install the engine stop lanyard switch
1
to the tiller handle bracket
2
. Tighten the
nut to the specified torque.
2. Install the throttle cables
3
and
4
to the
throttle shaft
5
.
3. Install the shift lever to the steering
bracket
6
.
4. Install the washers and bushings into the
steering bracket
6
.
5. Install the tiller handle bracket to the
steering bracket
6
, tighten the tiller han-
dle bracket nut
7
to the specified torque,
and then tighten the self-locking nut
8
to
the specified torque.
NOTE:
• Route the engine stop lanyard switch lead
9
and throttle cables
0
and
A
as shown.
• Install the corrugated tubes
B
so that they
contact the tiller handle bracket
C
.
T
R
.
.
Engine stop lanyard switch nut:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
S6D57020
A
4
5
3
1
2
S6D57030
6
7
8
9
0
A
B
C
T
R
.
.
Tiller handle bracket nut
7
:
10 N·m (1.0 kgf·m, 7.4 ft·lb)
Self-locking nut
8
:
22 N·m (2.2 kgf·m, 16.2 ft·lb)