Yamaha F2.5C, Service Manual, Page: 74 / 184

POWR
Power unit
5-13
6D55F11
Disassembling the manual starter
1. Remove the lock cam retainer, and then
remove the lock cam base plate
1
and
lock cam
2
.
2. Remove the drive plate
3
and drive
pawls
4
.
3. Remove the sheave drum
5
, cartridge
spring
6
, spring washer
7
, and starter
rope
8
.
Checking the spiral spring
1. Check the spiral spring for cracks, bends,
or damage. Replace the cartridge spring
if necessary.
Measuring the starter rope
1. Measure the starter rope length. Replace
if the length is out of specification.
Assembling the manual starter
1. Install the spring washer
1
and cartridge
spring
2
into the manual starter case.
NOTE:
• Install the spring washer with its projections
a
facing down towards the manual starter
case.
• Position the end
b
of the cartridge spring
into the indentation
c
in the manual starter
case.
2. Install the sheave drum
3
into the man-
ual starter case.
NOTE:
Position the projections
d
on the cartridge
spring case and the end
e
of the cartridge
spring into the indentations
f
in the sheave
drum.
S6D55310
1
2
3
4
4
S6D55320
S6D55330
5
6
7
8
Starter rope length:
1,625–1,727 mm (63.98–67.99 in)
b
a
c
1
2
S6D55340
3
f
S6D55350
d
e
d