Chapter 2
DME Designer Overview
DME Designer Owner’s Manual
36
6
Storing and Checking Scenes.
When moving online, the lowest scene must be stored. You can check if a scene is stored using the
“Scene Manager” dialog box.
See “Scene Manager” on page 63
7
Recalling Scenes.
When going online, the scene will be recalled. Its scene number must be displayed in [Scene
Number], and its scene name will be displayed in Scene Name. If [--------] is displayed of [Scene
Name], the scene will be recalled.
Main Panel Window
→
“Current Scene” (
)
See “Scene Manager” on page 63
8
Display the “Synchronization” dialog box.
Click [Synchronization] in the [Tools] menu or the large [Synchronization] button on the toolbar.
When the dialog box opens, a list of connected DME units will be obtained.
DMEs connected to the computer are displayed in the [Network] list.
NOTE
When requesting the “Synchronization” dialog box, a one-time alert will be displayed if no scene has been recalled, or
the MIDI Port settings have not been made. After clicking the [OK] button on the alert, each dialog will open. At this time,
you can make the needed settings in the displayed dialog box, and then again display the “Synchronization” dialog box.