Chapter 5
Components
DME Designer Owner’s Manual
277
Recalling a Library
The recall function reads stored parameters into the component editor.
■
Editor Windows
You can recall libraries in the component editor, user control editor, and user module editor
windows by clicking the [Recall Library] button. When a library is recalled in an editor window, the
parameter set is recorded to the selected snap button.
1
Click the snap button ([A] through [D]) that will record the parameter set.
2
Click the [Recall Library] button in the component editor.
The [Recall Library] menu will be displayed.
3
Click the library name (filename) in the [Recall Library] menu.
The parameters in the library will be recalled.
■
Designer Window
If you right-click on a component or user module in the design window, a context menu will be
displayed. You can recall a library using the [Recall Component Library] command.
If you click [Recall Component Library] in the context menu, the same menu is displayed as when
you click the [Recall Library] button in the editor window. If you select a library that is displayed in
the submenu, that library is recalled.
Not only the library name, but also the effect type is displayed in the submenu that appears when
you right-click on an SPX component.
