Yamaha C-50, Rigging Manual

Page: 323 / 497

6-43
Outboard Rigging Guide - 2001
60, C60/C70/70 Tiller Handle &
Steering Friction Kit
Tiller Handle
1. Remove (for 70hp model) the steering hook
1
.
N O T E : Use the removed nut for handle installa-
tion.
2. Install the tiller handle assembly
2
and nut
3
.
T orque: 38N m ( 3.8m-kg, 2 7 ft-lb.)
3. Install the following:
1
Grommet
2
Throttle Cable
3
Shift Cable
4
Extension Wire Harness
5
Main Switch Wire Leads
6
Battery Leads
7
Power Trim/Tilt Switch Leads
N O T E :
a. Pass the wire harness and remote control
cables through the grommet, and refit the
grommet.
b. Fit the cable clamp
7
to the outer remote
control cables.
c. Align the taped end a of the battery lead
and the extension wire harness with the
end of the grommet.
4. Install the fitting plate
1
and bolt
2
.
N O T E : After installing the fitting plate, lift
the tiller handle straight up.
T orque: 8N m ( 0.8m-kg, 5.8ft-lb.)