Yamaha Aventage RX-A3040, Owner'S Manual

Page: 147 / 182

CONFIGURATIONS
➤
Configuring the system settings (ADVANCED SETUP menu)
En
147
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of the unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO
to start the process.
Choices
Restoring the default settings (INITIALIZE)
Restores the default settings for the unit.
Choices
Updating the firmware (FIRM UPDATE)
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware via the network” (p.151).
Checking the firmware version (VERSION)
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in “System” (p.144) in the “Information” menu.
• It may take a while until the firmware version is displayed.
BACKUP Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
S BL PL S BR S B PR
S W1 S L S W2 S W S R
PL C L R PR
S TEREO
ENHANCER S LEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
B A C K U P
R E C O V . / B A C K U P
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
S BL PL S BR S B PR
S W1 S L S W2 S W S R
PL C L R PR
S TEREO
ENHANCER S LEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
C A N C E L
I N I T I A L I Z E
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
S BL PL S BR S B PR
S W1 S L S W2 S W S R
PL C L R PR
S TEREO
ENHANCER S LEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
U S B
F I R M U P D A T E
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
S BL PL S BR S B PR
S W1 S L S W2 S W S R
PL C L R PR
S TEREO
ENHANCER S LEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
x . x x
V E R S I O N