29
E
3. Install:
• Grommet
1
• Shift cable
2
• Throttle cable
3
• Battery cable
4
• Wiring harness
5
NOTE:
Align the taped end
a
of the battery cable with
the end of the grommet.
4. Fasten: (with the cable clamp
1
)
• Throttle cable
• Shift cable
5. Adjust:
• Shift cable joint position
Adjustment steps:
• Set the shift lever
1
to the neutral posi-
tion.
• Align the mark
a
on the shift rod link with
the mark
b
on the shift bracket.
• Adjust the position of the cable joint
2
until its hole aligns with the set pin.
• Install the clip
3
and tighten the locknut
4
.
WARNING
The cable joint must be screwed in a
minimum of 8.0 mm (0.31 in).
TillerHandle.book Page 29 Friday, April 12, 2013 3:19 PM
