manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 77 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 77

7-7

Apparel 

WARNING

POTENTIAL HAZARD 
Operating this ATV without wearing an
approved motorcycle helmet, eye pro-
tection and protective clothing. 
WHAT CAN HAPPEN
Operating without
an approved motor

-

cycle helmet in-
creases your
chances of a severe
head injury or death
in the event of an
accident. 
Operating without eye protection can re-
sult in an accident and increases your
chances of a severe injury in the event
of an accident. 

Operating without protective clothing
increases your chances of severe injury
in the event of an accident. 
HOW TO AVOID THE HAZARD 
Always wear an approved motorcycle
helmet that fits properly. You should
also wear: 

eye protection 

(goggles or face shield) 

gloves 
boots 
long-sleeved shirt or jacket 
long pants

U5FU13.book  Page 7  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments