manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 147 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 147

8-36

1. Bulb holder cover

6. Put a new headlight bulb into position,

and then secure it in place with the bulb
holder. 

7. Install the headlight bulb holder cover. 

CAUTION:

_ 

Make sure the headlight bulb holder cover
is securely fitted over the bulb holder and
seated against the reflector. 

_

8. Install the headlight assembly, and then

connect the coupler.

9. Adjust the headlight beam if necessary.

(See page 8-37.)

WARNING

POTENTIAL HAZARD 
The headlight bulb is hot when it is on
and immediately after it is turned off. 
WHAT CAN HAPPEN 
You can be burned, or a fire could start
if the bulb touches something flamma-
ble. 
HOW TO AVOID THE HAZARD 
Wait for the bulb to cool before touching
or removing it.

U5FU13.book  Page 36  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments