manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 127 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 127

8-16

5. Tap the element lightly to remove most of

the dust and dirt. Blow out the remaining
dirt with compressed air as shown. If the
element is damaged, replace it.

6. Wash the foam cover gently but thor-

oughly in water or solvent.

7. Squeeze the excess water or solvent out

of the foam cover and let it dry.

CAUTION:

_ 

●

Do not twist the foam cover when
squeezing it.

●

Do not add oil to the foam cover. 

_

8. Inspect the foam cover. If damaged, re-

place it.

9. Install the foam cover onto the air filter el-

ement.

10. Install the air filter assembly and parts re-

moved for access.

WARNING

POTENTIAL HAZARD 
Using low flash point solvents or gaso-
line to clean the foam cover. 
WHAT CAN HAPPEN 
Low flash point solvents or gasoline can
catch fire or explode. 
HOW TO AVOID THE HAZARD 
Use parts cleaning solvent to clean the
foam cover.

U5FU13.book  Page 16  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments