manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 135 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 135

8-24

EBU00623

Front brake adjustment

The front brake lever should have a free play
of zero mm (zero in) at the lever end. If not,
ask a Yamaha dealer to adjust it.

a. Free play: Zero mm (Zero in)

WARNING

POTENTIAL HAZARD

Operating with improperly serviced or
adjusted brakes.

WHAT CAN HAPPEN

You could lose braking ability, which
could lead to an accident.

HOW TO AVOID THE HAZARD

After servicing:

●

Make sure the brakes operate
smoothly and that the free play is cor-
rect.

●

Make sure the brakes do not drag.

●

Make sure the brakes are not spongy.
All air must be bled from the brake
system.

Replacement of brake components re-
quires professional knowledge. These
procedures should be performed by a
Yamaha dealer.

U5FU13.book  Page 24  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments