manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 27 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 27

4-4

EBU00051

Speedometer

The speedometer shows riding speed. This
speedometer is equipped with an odometer
and trip odometer. The trip odometer can be
reset to “0” with the reset knob. Use the trip
odometer to estimate how far you can ride on
a tank of fuel before going to reserve. This in-
formation will enable you to plan fuel stops in
the future.

1. Reset knob
2. Speedometer
3. Odometer
4. Trip odometer

EBU00052

Fuel gauge

The fuel gauge indicates the amount of fuel in
the fuel tank. When the needle reaches the
red line, refill the tank at the first opportunity.

1. Fuel gauge

NOTE:

If the machine runs out of fuel, move the fuel
cock lever to the “RES” position. Approxi-
mately 4.0 L (0.9 Imp gal, 1.1 US gal) of fuel
will be remaining in the tank.

U5FU13.book  Page 4  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments