manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 62 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 62

6-5

EBU00201

Shifting

This model has a 5-speed forward and 1-speed
reverse transmission with centrifugal automatic
clutch. The transmission allows you to control
the amount of power you have available at a
given speed or for starting accelerating, climb-
ing, etc. To shift into neutral, return the throttle
lever to its original position and repeatedly de-
press the shift pedal until it stops.

1. Shift pedal

N. Neutral

R. Reverse

CAUTION:

Do not coast for long periods with the en-
gine off, and do not tow the machine a
long distance. Even with gears in neutral,
the transmission is only properly lubricat-
ed when the engine is running. Inadequate
lubrication may damage the transmission.

EBU00205

To start out and accelerate:

1. Release the throttle lever.

CAUTION:

Always close the throttle while shifting
gears. Otherwise, damage to the engine
and drive train may result.

2. Shift into first gear and release the shift

pedal.

3. Open the throttle gradually.

U5FU13.book  Page 5  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments