manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 61 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 61

6-4

EBU00195

Reverse knob operation and reverse 
driving

CAUTION:

Before shifting, stop the machine and re-
turn the throttle lever to its closed posi-
tion. Otherwise the transmission may be
damaged.

1. Bring the machine to a complete stop

and return the throttle lever to the closed
position with the transmission in neutral.

2. While applying the rear brake lever, turn

the reverse knob clockwise with your
right hand.

3. Shift the transmission into reverse by

pressing down on the shift pedal.

NOTE:

When in reverse, the reverse indicator light
should be on. If the light does not come on,
ask a Yamaha dealer to inspect the machine.

4. Check behind you for people or obsta-

cles, then release the rear brake lever.

5. Open the throttle lever gradually and con-

tinue to watch to the rear while backing.

WARNING

POTENTIAL HAZARD

Improperly operating in reverse.

WHAT CAN HAPPEN

You could hit an obstacle or person be-
hind you, resulting in serious injury.

HOW TO AVOID THE HAZARD

When you shift into reverse, make sure
there are no obstacles or people behind
you. When it is safe to proceed, go slow-
ly.

U5FU13.book  Page 4  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments