Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 29 | Manualshive

Page: 29 / 172

Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 29

4-6

EBU00060

On command four-wheel drive switch
“2WD/4WD”

To change from two-wheel drive (2WD) to
four-wheel drive (4WD), stop the ATV and set
the switch to the 4WD position. To change
from four-wheel drive (4WD) to two-wheel
drive (2WD), stop the ATV and set the switch
to the 2WD position.

1. On command four-wheel drive swich “2WD/4WD”

WARNING

POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 2WD while the ATV is moving.
WHAT CAN HAPPEN
The ATV handles differently in 2WD
than in 4WD in some circumstances.
Changing from 2WD to 4WD or from
4WD to 2WD while moving may cause
the ATV to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing
from 2WD to 4WD or vice-versa.

U5FU13.book Page 6 Wednesday, April 24, 2002 11:02 AM

«
...
27
28
29
30
31
...
»

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments