manualshive.com logo in svg

Yamaha 4X4 BIG BEAR PROFESSIONAL, Owner'S Manual, Page: 143 / 172

Share
Download
Yamaha 4X4 BIG BEAR PROFESSIONAL Owner'S Manual Download Page 143

8-32

EBU00380

Battery

This machine is equipped with a sealed-type
battery. Therefore it is not necessary to check
the electrolyte or add distilled water in the bat-
tery. If the battery seems to have discharged,
consult a Yamaha dealer.

CAUTION:

Do not try to remove the sealing caps of
the battery cells. You may damage the
battery.

WARNING

POTENTIAL HAZARD

Failure to handle batteries or battery
electrolyte carefully.

WHAT CAN HAPPEN

You could be poisoned. You could be
severely burned by the sulfuric acid in
battery electrolyte. Batteries produce
explosive gases.

HOW TO AVOID THE HAZARD

Avoid contact with skin, eyes or cloth-
ing. Always shield eyes when working
near batteries. Keep out of reach of chil-
dren.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of wa-
ter or milk. Follow with milk of magnesia,
beaten egg or vegetable oil. Get prompt
medical attention.
EYES: Flush with water for 15 minutes
and get prompt medical attention. Keep
batteries away from sparks, flames, cig-
arettes or other sources of ignition. Ven-
tilate when charging or using in a closed
space.

U5FU13.book  Page 32  Wednesday, April 24, 2002  11:02 AM

Summary of Contents for 4X4 BIG BEAR PROFESSIONAL













































































































































































Reviews:

No comments