Yamaha 225G, Owner'S Manual

Page: 146 / 219

4-13
GB
4) Reinstall the filter element in the cup.
Make sure the O-ring is in position in
the cup. Insert the cup and O-ring into
the filter housing. Screw the ring nut
onto the filter housing until the ring is
lightly seated.
5) Tighten the ring nut approximately an
additional 1/4 turn until ring nut is
tight.
Align one of the four larger ring nut
tabs into the slot of the locking tab.
Install the locking tab bolt and tight-
en.
6) Run the engine and check the filter
and lines for leaks.
1
Filter element
2
O-ring
3
Filter cup
4
Ring nut
5
Filter housing
NOTE:
If any water is in the fuel, the red ring in
the fuel filter unit will float. If so, remove
the cup and drain the water.
207052
q
w
e
r
t
213021
q
w
EMK56010
CHECKING WATER TRAP UNDER
ENGINE OIL TANK
There is a trap at the bottom of the engine
oil tank. If water or foreign matter is visi-
ble in this trap, consult a Yamaha dealer.
1
Trap
2
Engine oil tank
66K-9-73 (E,F,S) 4B 5/8/01 10:41 AM Page 144