CHK
ADJ
3-19
8. Install:
•
Spark plug
9. Connect:
•
Spark plug cap
CHECKING THE ENGINE OIL LEVEL
1. Place the machine on a level surface.
3. Remove engine oil cap cover .
2. Start the engine, warm it up several min-
utes, and then turn it off.
10. Install:
•
seat
•
left side cover and right side cover
Refer to “SEAT AND FENDERS”.
4. Check:
•
engine oil level
Oil level should be between the minimum
level mark
and the maximum level mark
.
Low oil level
→
Add oil to the proper level.
•
Wait a few minutes until the oil settles before
checking the oil level.
•
Do not screw the dipstick
in when check-
ing the oil level.
Spark plug
12.0 Nm (1.20 m·kgf, 8.9 ft · lbf)
MEASURING THE COMPRESSION PRESSURE/
CHECKING THE ENGINE OIL LEVEL
1
1
2
a
b
2
Recommended engine oil type
YAMALUBE, SAE10W-30,
SAE10W-40, SAE20W-40,
SAE20W-50 or SAE5W-30
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
TIP
50˚
90˚
70˚
30˚
10˚
0˚
110˚ 130˚F
-20
-10
0
10
20
30
40
50˚C
SAE 20W-40
YAMALUBE (20W-50), or SAE20W-50
YAMALUBE (10W-40) or SAE 10W40
SAE 10W-30
SAE 5W-30
a
b