CHK
ADJ
3-28
CHANGING THE COOLANT/
12.Fill:
•
coolant reservoir
(with the recommended coolant to the
maximum level mark
)
13.Install:
•
coolant reservoir cap
14.Start the engine, warm it up for ten minutes,
15.Pour the recommended coolant into the radi-
ator until it is full.
17.Start the engine, and then check for coolant
leakage.
16.Stop the engine and allow it to cool. If the
coolant level has dropped after the engine
has cooled add sufficient coolant until it re-
aches the top of the radiator, and then install
the radiator cap.
and then rev the engine five times.
18.Inspect:
•
coolant level
Refer to “CHECKING THE COOLANT
LEVEL”.
Before inspecting the coolant level, wait a few
minutes until the coolant has settled.
a
a
•
front panel
Refer to “FRONT CARRIER, FRONT BUMPER
AND FRONT FENDER”.
•
• coolant indicator light
front carrier
CHECK THE COOLANT TEMPERATURE
INDICATOR LIGHT
1.
Check:
1
CHECK THE COOLANT TEMPERATURE INDICATOR LIGHT
TIP
Cracks/wear/damage
→
Replace.
1
19.Install:
