4-55
ENG
CRANKCASE AND CRANKSHAFT
EAS00418
ASSEMBLING THE CRANKCASE
1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Install:
(onto the crankcase mating surfaces)
3. Install:
crankshaft
timing chain
4. Tighten:
crankcase
10 Nm (1.0 m
•
kg, 7.2ft
•
lb)
T
R
.
.
• crankcase gasket
•
•
•
1
1
2
1
2
1
1
2
To avoid scratching the crankshaft and to
ease the installation procedure, lubricate the
oil seal lips with lithium-soap-based grease
and each bearing with engine oil.
TIP
Put
the
timing
chain
in
parallel
into
the
crankcase.
Manually
rotate
the
crankshaft
to
check
whether
it
is
tightly
engaged
with
the
timing chain (if not, install again.)
NOTICE
