Yamaha 02R, Owner'S Manual

Page: 88 / 354

Mixing and Automation 79
Digital Recording Console 02R Getting Started Guide
3. Press the [AUTOMIX] button several times.
You can stop when the “Fader Edit” screen appears:
This display allows you to watch the fader movements as dynamic
bargraphs. Several features make this display convenient to use while you
perform detailed fader/encoder edits.
4. Use the CURSOR buttons to select “Fader Edit Out – RETURN” and
press [ENTER] to change its value.
If the RETURN check box is not selected, you may want to move the fader
back to its previously recorded level before you punch-out. If the RETURN
check box is selected, the fader will automatically return to the previously
recorded level when you punch out. The time it takes to return to the
previous level is controlled by the “Time” field.
5. Select the “RECORD” icon with the CURSOR buttons and press the
[ENTER] button.
The “RECORD” icon will flash.
6. Start the device that is providing the timecode.
The 02R will remain in AUTOMIX RECORD READY status.
7. Monitor the recording. At the punch-in location, press the [SEL]
button for the tape return channel you want to edit.
Recording will begin from where you pressed the [SEL] button.
8. While monitoring the recording, adjust the fader you want to edit.
As you operate the fader, the display shows the previously recorded
position as well as the new position. An arrow in the display indicates the