Yamaha 02R, Owner'S Manual, Page: 149 / 354

MIXING Display Functions 39
Digital Recording Console 02R User’s Guide
Routing
The ROUTING display function is used to select the bus routing of the
input channels and tape and effect return signals. The first sixteen input
channels, 1 through 16, can also be routed to the direct outputs.
By default, all channels are routed to the stereo bus.
Direct Outputs
All the input channels and tape and effect return signals can be routed to
the output buses and the stereo bus. You can only route the first sixteen
input channels, MIC/LINE 1 through 16, to the direct outputs.
The outputs for the optional boards are as follows:
If you select both direct out and an output bus for a channel, the direct
output will take priority.
Display Screens
Shown below is the first page of the ROUTING display function –
MIC/LINE 1 through 16 and LINE 17/18 through 23/24:
Select this screen by pressing a [SEL] button for one of the MIC/LINE
channels.
Slot Direct Out all OFF Direct Out all ON
Slot 1 Bus 1 to 8 Direct 1 to 8
Slot 2 Bus 1 to 8 Direct 9 to 16
Slot 3 Bus 1 to 8 Bus 1 to 8
Slot 4 Bus 1 to 8 Bus 1 to 8
1. Press the [ROUTING]
button.
The ROUTING display
function appears.
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Use the CURSOR buttons
to select the routing
destinations and press
the [ENTER] button to
switch a route ON or OFF.
ROUTING