Yamaha 02R, Owner'S Manual, Page: 80 / 354

Mixing and Automation 71
Digital Recording Console 02R Getting Started Guide
Creating a New Automix
To record an entire mixing session with the Digital Recording Console 02R
automation system, you must first create a new automix. When a new
automix is created, the contents of the current automix (referred to as
“events”) are deleted and the current automix is returned to its default
settings.
If you want to keep the contents of the current automix, store them into an
available memory location before proceeding.
1. Press the [AUTOMIX] button again.
The “Memory Management” screen appears:
2. Use the SCENE MEMORY increment or decrement buttons to
select your starting scene memory and press the [RECALL]
button.
The selected scene memory is recalled.
Your mixdown scene memory should be stored with the [FLIP] button
pressed so that the faders operate the tape returns rather than the input
channels.
3. Set your starting levels for the mixdown and press the [STORE]
button to update the scene memory.
The 02R will display a popup confirmation request message. Select the
“EXECUTE” icon and press the [ENTER] button.
Note:
You can customize your 02R so that the [FLIP] button status is ignored
during scene memory recalls. In this case, you may need to press the [FLIP] button
before you start recording your automix. See “Preferences” on page 162 of the
User’s Guide for more information.
AUTOMIX
STORE RECALL
SCENE MEMORY