Control unit
Loosen the lid securing screw on the right hand
side of the control unit and hinge the lid forward
and to the left hand side to reveal the battery
compartment
1
Remove the four screws as shown and take off
the compartment lid.
2
Insert the D cell batteries provided into the
battery compartment, taking care to put the
batteries in the right way around.
3
The unit will give a long beep when the last
battery is inserted and the front display will
show Alarm On for a while.
4
Replace the battery compartment with the four
screws taking care not to over tighten.
WARNING
The siren is very loud, avoid touching the
tamper switch arm or opening and closing the
lid unnecessarily.
6
OK
#
*
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
0
1
2
abc
3
def
4
ghi
Unpack all the parts onto a table top
Identify all the parts to get to know the system and get up and running quickly by programming
them on a table top before installing them.
2
Siren
WARNING: The siren is very loud, be
prepared!
1
Remove the cover by unscrewing the single
screw located at the bottom.
2
Remove the covers of the two internal
compartments.
3
Insert the four D batteries as shown.
There will be a slight pause and the siren will
beep and the LEDs flash.
Tamper
switch
Jumper
switches
Fixing holes
x 4
