54
Functions to use as necessary
Audio volume adjustment of PC (Portable HRI Mode only)
Refer to “
Adjusting Audio Level in the Access Point (Portable HRI Mode)
” or “
Adjusting Audio Level in the Direct
Operation (Portable HRI Mode)
” (page 56) according to the mode you are using.
Adjusting Audio Level in the Access Point (Portable HRI Mode)
Audio level adjustment should be done with no connection to the node station or room.
Receive audio level adjustment (PC microphone input level)
Adjust the volume level so that the “
VOL bar graph
” is 50% by turning the VOL knob of FT3D/FT2D, and then make the
following adjustments. Also, when using FT3D/FT2D as a transceiver of a Portable Digital Node station, adjust it so that it
is almost the same volume level.
1. From the “
View
” menu, click [
Audio adjustment
].
The “
Audio adjustment
” window will appear.
2. Click [
Start
] in the “
Graph select
” area.
3. Click [
Sound Property
].
The WINDOWS “
Sound
” window opens.
For Portable Digital Node stations, adjust the audio level
with the WINDOWS sound setting.
4. Click the [
Recording
] tab in the WINDOWS “
Sound
”
window.
