23
Function
Key or Dial
Enters the Set mode*
Press and hold the DISP key
Enters the BACKTRACK (COMPASS) screen
Press the DISP key
Registering to Memory Channel
Press and hold the F(MW) key
Displays the Function Menu Screen
Press the F(MW) key
Selects the Transmission Power Level
Touch [TX PWR] in the Function Menu Screen or press
the P4 key on the microphone (by default setting)
Recalls the “HOME” channel
Touch [HOME] in the Function Menu Screen or press
the P2 key on the microphone (by default setting)
Reverses the transmit and receive frequencies
Touch [REV] in the Function Menu Screen
Squelch OFF
Press the P1 key on the microphone (by default setting)
Adjusts the squelch level
Touch [SQL] on the LCD screen, then rotate the Band
A DIAL knob (Upper)
Switches Busy detection between “Noise squelch” and
“DG-ID number match”.
Press and hold the Band B DIAL knob (Lower)
* Some setting items in the set mode are automatically set for the Portable Digital Node function, so these
settings cannot be used.
FTM-300D
On the frequency setting screen, you can set and operate the following with the transceivers key and
DIAL
knob settings.
Function
Key or Dial
Switches between the Access Point and the Direct Operation Press the A/B key
Starts operation for the Portable Digital Node
Press the DX key or press the P3 key on the micro-
phone (by default setting)
Sets the operation frequency
Rotate the DIAL knob or ten key on the microphone
Selects the operating band
Press the BAND key
Recalls the “HOME” channel
Press the P2 key on the microphone (by default setting)
Switches between the VFO mode and the Memory
Channel mode
Press the V/M (MW) key
Registering to Memory Channel
Press and hold the V/M key
Sets the transmit and receive DG-ID number
Press and hold the GM key
Enters the Setup menu*
Press and hold the F(SETUP) key
Enters the BACKTRACK (COMPASS) screen
Press the DISP key
Selects the Transmission Power Level
[TXPWR] on the Function Menu Screen or press the
P4 key on the microphone (by default setting)
Reverses the transmit and receive frequencies
Press and the P2 key ~ P4 key on the microphone*
*Setting of "REVERSE" function is necessary for P2 ~ P4
keys in set mode.
Squelch OFF
Press and the P2 key ~ P4 key on the microphone*
*Setting of "SQL OFF" function is necessary for P2 ~ P4
keys in set mode.
Adjusts the squelch level
Press the SQL key, then rotate the DIAL knob
Switches Busy detection between “Noise squelch” and
“DG-ID number match”.
Press and hold the A/B key
* Some setting items in the set mode are automatically set for the Portable Digital Node function, so these
settings cannot be used.
