18
Authenticate (activate) the WIRES-X server
If the WIRES-X server authentication (activation) has not been completed on the personal computer to be used, the
“WIRES ID Activation” screen opens automatically.
1. Enter the “
Node ID
” and “
Room ID
” (both are 5-digit numbers)
.
• Be sure to connect the transceiver started in “
Portable digital node mode
” or “
Portable HRI mode
” to a PC. Node
ID and Room ID can not be entered when the RADIO ID is not automatically entered in the Serial Number box.
• “
RADIO ID
” of the transceiver connected to the PC is automatically displayed in the serial number box
. If “
RADIO
ID
” is not displayed, check the connection between the transceiver and the PC again.
• Remove the HRI-200 interface unit from the PC when using the Portable Digital Node function.
• The Node ID and the Room ID are described in the e-mail received when the user registration is completed.
2. Click [
ID Entry
]
.
When activation is completed, information on registration is automatically displayed for “
User ID
”, “
Call Sign
”, “
City
”,
“
State
”, and “
Country
”.
3. Click [
OK
].
The information of the User ID is saved on the computer and “
Settings
” window will appear.
On this screen the settings such as “
Comment
” of your station may be added to display in the ID list.
4. Click [
OK
].
The “
Settings
” window closes and the “
Main Screen
” will appear.
When using it in “
Direct Operation
”, “
Transceiver settings (Access Point only)
” (page 19) is not necessary, so the
initial setting is completed. Proceed to “
Basic Operation
” (page 21).
