35
(2) Connecting a node or a room by operating the transceiver of the portable node
FT3D/FT2D
There are five ways to connect to a digital room or a digital node on the Internet.
①
Searching from the node & room lists
(
page 35
)
②
Searching the node ID or the room
(
page 35
)
③
Selecting the node or the rooms registered in the category list
(
page 36
)
④
Connecting to the node or room you have most recently connected
(
page 37
)
⑤
Entering the DTMF ID number (5 digits) of the node or the room
(
page 37
)
Another C4FM digital transceiver accessing the portable node frequency and using the WIRES-X DG-ID number may
also connect a node or a room. For details, refer to the
Operating Manual (WIRES-X Edition)
of each transceiver.
①
Searching from the node & room lists
1. Touch [
SEARCH & DIRECT
].
Displays the category list.
2. Touch [
ALL
].
Displays the list of accessible nodes and rooms.
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
3. Touch the node or room you want to connect to establish the connection.
By pressing the PTT switch, you may also establish the connection while talking.
•
Touch [▲] or [▼] to download and display 20 rooms or nodes at a time. Touch
[
TOP
] to return to the first 20 rooms or nodes.
Once connection is successfully established, “
Connected
” will appear on the LCD.
If connection is unsuccessful, an error message appears and the screen returns
to the list of nodes and rooms.
②
Searching by node or room ID
1. Touch [
SEARCH & DIRECT
].
Displays the category list.
2. Touch [
SEARCH & DIRECT
].
Displays the character input screen.
