16
Initial Setting (setting is required only once at the beginning)
Start the transceiver
◎
Portable Digital Node mode (Supports linking to the Internet only in C4FM digital mode)
FT3DR/DE or FT2DR/DE
1. Press and hold the [
X
] key, [
BAND
] key and the POWER switch to turn the transceiver
ON
.
“
PDN
” is displayed on the LCD screen.
FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [
DX
] key and the POWER switch to turn the transceiver
ON
.
“
PDN
” is displayed on the LCD screen.
FTM-300DR/DE or FTM-400DR/DE
1. Press and hold the [
DX
] key and the POWER switch to turn the transceiver
ON
.
“
WIRES-X PDN
” is displayed on the LCD screen.
FTM-100DR/DE
1. Press and hold the [
DX
] key and the POWER switch to turn the transceiver
ON
.
“
PDN
” is displayed on the LCD screen.
◎
Portable HRI Mode (Supports Internet communication in digital mode and analog mode)
FT3DR/DE or FT2DR/DE
1. Press and hold the [
X
] key, [
BACK
] key and the POWER switch to turn the transceiver
ON
.
“
WIRES-X
” is displayed on the LCD screen.
FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [
DX
] key, [
GM
] key and the POWER switch to turn the transceiver
ON
.
“
YAESU
” logo and “
WIRES-X
” logo is displayed on the LCD screen.
When connected to a PC and communicating with the WIRES-X software, “
WIRES-X NODE
” is displayed in the
center of the screen.
FTM-300DR/DE
1. Press and hold the [
DX
] key, [
GM
] key and the POWER switch to turn the transceiver
ON
.
“
YAESU
” logo and “
WIRES-X
” logo is displayed on the LCD screen.
When connected to a PC and communicating with the WIRES-X software, “
WIRES-X NODE
” is displayed in the
upper of the screen.
FTM-100DR/DE
1. Press and hold the [
DX
] key, [
GM
] key and the POWER switch to turn the transceiver
ON
.
“
WIRES-X
” logo is displayed on the LCD screen.
• Repeating the above operation will return the transceiver to the normal mode.
• To switch between “
Portable Digital Node Mode
” and “
Portable HRI Mode
”, start with the normal mode first and then
perform the above operation.