Yaesu FT-2000D, Operating Manual

Page: 9 / 140

Page 7 FT-2000D O
PERATING
M
ANUAL
R
ESETTING THE
M
ICROPROCESSOR
R
ESETTING
M
EMORIES
(
O
NLY
)
Use this procedure to reset (clear out) the Memory chan-
nels previously stored, without affecting any configura-
tion changes you may have made to the Menu settings.
1. Press the front panel’s [ POWER
] switch to turn the
transceiver off.
2. Press and hold in the [
A
X X
X X X
M
] button; while holding it
in, press and hold in the front panel’s [ POWER
] switch
to turn the transceiver on. Once the transceiver comes
on, you may release the [
A
X X
X X X
M
] button.
M
ENU
R
ESETTING
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel’s [ POWER
] switch to turn the
transceiver off.
2. Press and hold in the [ MENU
] button; while holding it
in, press and hold in the front panel’s [ POWER
] switch
to turn the transceiver on. Once the transceiver comes
on, you may release the [
MENU
] button.
F
ULL
R
ESET
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel’s [ POWER
] switch to turn the
transceiver off.
2. Press and hold in the [
FAST
] and [
LOCK
] buttons;
while holding them in, press and hold in the front
panel’s [
POWER
] switch to turn the transceiver on.
Once the transceiver comes on, you may release the
other two switches.
I
MPORTANT
N
OTE
ˆ
When the optional
DMU-2000
is connected and is
turned on the [ POWER
] switch, the
DMU-2000 ’s data
is also reset when perform the full reset of the FT-
2000D
.
ˆ When the optional RF uTUNE Kit is used, perform
the full reset of the
FT-2000D after taking the optional
RF μ TUNE Kit off.
[POWER] button [A
X X X X X
M] button
[POWER] button [MENU] button
B
EFORE
Y
OU
B
EGIN
[POWER] button [LOCK] button
[FAST] button