Yaesu FT-2000D, Operating Manual

Page: 125 / 140

Page 123 FT-2000D O
PERATING
M
ANUAL
MODE-RTY G
ROUP
078 rtty R PLRTY
Function : Selects normal or reverse Mark/Space polarity
for RTTY receive operation.
Available Values : nor / rEU (REV)
Default Setting : nor
079 rtty T PLRTY
Function : Selects normal or reverse Mark/Space polarity
for RTTY transmit operation.
Available Values : nor / rEU (REV)
Default Setting : nor
080 rtty RTY OUT
Function : Selects the receiver to be connected to the data
output port (pin 2) of the RTTY jack.
Available Values : nAin (Main) / Sub
Default Setting : nAin (Main)
081 rtty OUT LEL
Function : Sets the FSK RTTY data output level at the
output port (pin 2) of the
RTTY
jack.
Available Values : 0 ~ 100
Default Setting : 50
082 rtty SHIFT
Function : Selects the frequency shift for FSK RTTY op-
eration.
Available Values :170 / 200 / 425 / 850 Hz
Default Setting : 170 Hz
083 rtty TONE
Function : Selects the Mark tone for RTTY operation.
Available Values : 1275 / 2125 Hz
Default Setting : 2125 Hz
M
ENU
M
ODE
MODE-FM G
ROUP
074 F3E MICGAIN
Function : Sets the microphone gain for the FM mode.
Available Values : Ur (VR) / 0 ~ 100
Default Setting : 50
When this menu is set to “Ur (VR),” you may adjust the
microphone gain using the front panel’s [
MIC
] knob.
075 F3E MIC SEL
Function : Selects the microphone to be used on the FM
mode.
Available Values : Frnt / dAtA / PC
Default Setting : Frnt
Frnt (FRONT): Selects the microphone connected to
the front panel’s MIC jack while us-
ing the FM mode.
dAtA: Selects the microphone connected to
pin 1 of the
PACKET Jack while us-
ing the FM mode.
PC: This parameter is for future expansion
of this transceiver’s capabilities, but
at this time is not supported.
076 F3E 28 RPT
Function : Sets the magnitude of the repeater shift on the
28 MHz band.
Available Values : 0 ~ 1000 kHz (10 kHz/step)
Default Setting : 100 kHz
077 F3E 50 RPT
Function : Sets the magnitude of the repeater shift on the
50 MHz band.
Available Values : 0 ~ 4000 kHz (10 kHz/step)
Default Setting : 1000 kHz