Yaesu FT-2000D, Operating Manual

Page: 49 / 140

Page 47 FT-2000D O
PERATING
M
ANUAL
C
ONVENIENCE
F
EATURES
B
AND
S
TACK
O
PERATION
The FT-2000D utilizes a triple band-stack VFO selection technique, that permits you to store up to three favorite frequen-
cies and modes onto each band’s VFO register. For example, you may store one frequency each on 14 MHz CW, RTTY, and
USB, then recall these VFOs by successive, momentary presses of the [
14
] MHz band button. Each Amateur band key may
similarly have up to three frequency/mode settings applied. Both the Main (VFO-A) and Sub (VFO-B) systems have their
own, independent, band stacks.
A typical setup, for the 14 MHz band, might be arranged like this:
1. Program 14.025 MHz, CW Mode, then press the [
14
]
MHz band button;
2. Program 14.080 MHz, RTTY Mode, then press the [ 14
]
MHz band button;
3. Program 14.195 MHz, SSB Mode, then press the [ 14
]
MHz band button.
With this configuration, successive momentary presses of
the [
14
] MHz band button will allow you to toggle se-
quentially through these three VFOs.
C.S
(
C
USTOM
S
WITCH
)
An often-used Menu mode selection may be brought out to the front panel’s [C.S] button.
[BAND] Switch
USB
RTTY
CW
C.S Setup
1. Press the [ MENU
] button to engage the Menu mode;
the Menu list will appear on the display.
2. Rotate the Main Tuning Dial knob to select the Menu
item you want to be able to access via the [ C.S
] but-
ton.
3. Press and hold in the [ C.S
] button for two seconds to
lock in your selection.
4. Press and hold in the [ MENU
] button for two seconds
to save the new configuration and exit to normal op-
eration.
Menu Selection Recall via [C.S] button
Press the [ C.S
] button.
The programmed Menu item will appear on the display.
You may now rotate the [
SUB VFO-B
] knob to change
the setting of this menu item. Press the [ MENU
] button
for two seconds, when you are done, to save the new con-
figuration and exit to normal operation.
Main Tuning Dial Knob
[C.S] Button
[MENU] Button
[SUB VFO-B] Knob
[MENU] Button
[C.S] Button