Yaesu FT-2000D, Operating Manual

Page: 129 / 140

Page 127 FT-2000D O
PERATING
M
ANUAL
112 SCP 14.0 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values : (1)4.000 - (1)4.349 MHz (1 kHz/step)
Default Setting : (1)4.000 MHz
113 SCP 18.0 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values : (1)8.000 - (1)8.199 MHz (1 kHz/step)
Default Setting : (1)8.068 MHz
114 SCP 21.0 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values : (2)1.000 - (2)1.449 MHz (1 kHz/step)
Default Setting : (2)1.000 MHz
115 SCP 24.8 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values : (2)4.800 - (2)4.989 MHz (1 kHz/step)
Default Setting : (2)4.890 MHz
116 SCP 28.0 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values : (2)8.000 - (2)9.699 MHz (1 kHz/step)
Default Setting : (2)8.000 MHz
117 SCP 50.0 FIX
Function : Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values : (5)0.000 - (5)3.999 MHz (1 kHz/step)
Default Setting : (5)0.000 MHz
M
ENU
M
ODE
TUNING G
ROUP
118 tun DIALSTP
Function : Setting of the Tuning Dial knob’s tuning speed
except the FM and FM-PKT modes.
Available Values : 1 / 5 / 10 Hz
Default Setting : 10 Hz
119 tun CW FINE
Function : Enabling/disabling of the “Fine” tuning speed
in the CW, RTTY, and PKT-SSB modes.
Available Values : EnA (ENABLE) / diS (DISABLE)
Default Setting : diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW,
RTTY, and PKT-SSB modes.
diS (DISABLE): Tuning according to the steps deter-
mined via menu item “118 tun
DIALSTEP.”
120 tun MHz SEL
Function : Selects the tuning steps for the [ SUB VFO-B
]
knob when the [ MHz
] button is pressed.
Available Values : 1 / 0.1 MHz
Default Setting : 1 MHz
121 tun AM STEP
Function : Selects the tuning steps for the microphone’s
[
UP
]/[
DWN
] keys in the AM mode.
Available Values : 2.5 / 5 / 9 / 10 / 12.5 kHz
Default Setting : 5 kHz
122 tun FM STEP
Function : Selects the tuning steps for the microphone’s
[
UP
]/[
DWN
] keys in the FM and FM-PKT modes.
Available Values : 5 / 6.25 / 10 / 12.5 / 20 / 25 kHz
Default Setting : 5 kHz
123 tun FM DIAL
Function : Setting of the Tuning Dial knob’s tuning speed
in the FM mode.
Available Values : 10 / 100 Hz
Default Setting : 100 Hz
124 tun MY BAND
Function : Programs a band to be skipped while selecting
bands using the [
SUB VFO-B
] knob.
Available Values : 1.8 ~ 50 / GE / AU
Default Setting : ---
To program the band to be skipped, rotate the [
SUB VFO-
B
] knob to recall the band to be skipped while selecting
bands via the [ SUB VFO-B
] knob, then press the [
ENT
]
button to change this setting to “ON” (a “
d dd dd
” notation will
replace the “
E EE EE
” notation). Repeat the same procedures to
cancel the setting (skipped “Off”: “
d dd
dd
” notation appears).
SCOPE G
ROUP