Yaesu FT-2000D, Operating Manual

Page: 103 / 140

Page 101 FT-2000D O
PERATING
M
ANUAL
Checking a Memory Channel’s Status
Before programming a channel into memory, you can check the current contents of that channel without the danger of over-
writing the channel accidentally.
M
EMORY
O
PERATION
S
TANDARD
M
EMORY
O
PERATION
1. Press the [ A
X X
X X
X
M
] button momentarily.
The data stored in the currently-selected memory chan-
nel will be displayed in the Sub band (VFO-B) fre-
quency field. However, since you are only checking
the contents of the memory channel, your radio will
not have moved to the memory channel’s frequency.
2. Rotate the [ SUB VFO-B
] knob to select a different
memory channel. To exit from the Memory Check
mode, press the [
A
X X X X X
M
] button momentarily once
more.
A
DVICE
:
ˆ While the Memory Check function is engaged, the
memory channel number will blink in the multi-panel
window.
ˆ
While operating in the VFO mode, using Memory
Check, you may store the current contents of the Main
(VFO-A) register into the selected memory by press-
ing and holding in the [
A
X X
X X X
M
] button for two seconds
(until the double beep). Conversely, if you wish to write
the contents of the current memory into the Main (VFO-
A) register, press and hold in the [
M
X X
X X X
A
] button for
two seconds.
Erasing Memory Channel Data
1. Press the [ A
X X
X X
X
M
] button.
The data stored in the currently-selected memory chan-
nel will be displayed in the Sub (VFO-B) band fre-
quency field.
2. Rotate the [ SUB VFO-B
] knob to select the memory
channel that you would like to erase.
3. Press the [ LOCK
] button to erase the contents of the
selected memory channel.
A
DVICE
:
ˆ After erasure, only the memory channel number will
remain; the frequency data will disappear from the dis-
play.
ˆ If you make a mistake and wish to restore the memory’s
contents, just repeat steps (1) through (3) above.
[A
X X
X X
X
M] Button
[SUB VFO-B] Knob
[LOCK] Button
[SUB VFO-B] Knob
[A
X X
X X X M] Button