Yaesu FT-2000D, Operating Manual

Page: 101 / 140

Page 99 FT-2000D O
PERATING
M
ANUAL
M
EMORY
O
PERATION
QMB
(
Q
UICK
M
EMORY
B
ANK
)
The Quick Memory Bank consists of five memories (labeled “
C-1 C-1
C-1 C-1 C-1
” through “
C-5 C-5
C-5 C-5 C-5
.”) independent from the regular and PMS
memories. These can quickly store operating parameters for later recall.
QMB Channel Storage
1. Tune to the desired frequency on the Main (VFO-A)
band.
2. Press the blue [ QMB
(
STO
)] button. The
“beep” will confirm that the contents of
the Main (VFO-A) band have been writ-
ten to the currently-available QMB
memory.
If you repeatedly press the [ QMB
(
STO
)] button, the QMB
memories will be written in the following order:
C-2 C-2 C-2 C-2 C-2
Æ
C-3 C-3 C-3 C-3 C-3
Æ
C-4 C-4 C-4 C-4 C-4
Æ
C-5 C-5 C-5 C-5 C-5
Æ
C-1 C-1 C-1 C-1 C-1
......
Once all five QMB memories have data on them, previous
data (starting with channel “
C-1 C-1 C-1 C-1 C-1
”) will be over-written on
a first-in, first-out basis.
QMB Channel Recall
1. Press the [
QMB
(
RCL
)] button. The current QMB
channel’s data will be shown on the Main
(VFO-A) frequency display field and the
QMB memory channel number will be
shown in the Multi-Display Window.
2. Repeatedly pressing the [ QMB
(
RCL
)] button will
toggle you through the QMB channels:
C-2 C-2
C-2 C-2 C-2
Æ
C-3 C-3
C-3 C-3 C-3
Æ
C-4 C-4
C-4 C-4 C-4
Æ
C-5 C-5
C-5 C-5 C-5
Æ
C-1 C-1
C-1 C-1 C-1
......
3. Press the [ V/M
] button to return to the VFO or Memory
mode.
A
DVICE
:
Rotating the Main Tuning Dial knob, or changing the op-
erating mode, will place the transceiver in the “Memory
Tune” mode, which is a temporary “pseudo-VFO” method
of tuning off of a stored memory channel. If you do not
over-write the contents of the current memory channel,
the original contents will not be disturbed by the initiation
of Memory Tune operation.
[QMB(STO)] Button
[V/M] Button
[QMB(RCL)] Button