manualshive.com logo in svg

Y3K XDVR2, User Manual

Share
Download
Y3K XDVR2 User Manual Download Page 96

 

User’s Manual 

 
 

 

 

 

95

 

5.7   

Database Setup > 

The menu displays information of internal and external disks. In the Main 
menu, move the cursor to <Database Setup> and press ENTER. The 
following menu is displayed. 

 

Database Setup 

1. Total Size 
2. Free Size 
3. Avail. REC Time 
4. Internal Disks 
5. External Disks 

xxx GB   
xxx GB   

3Days 7Hrs   

 

 

NOTE:

 If the hard disk is failed detected, the message “HDD fail” will 

display. 

 

5.7.1   

Total / Free Size of HDD > 

The Total Size of HDD shows the total capacity of HDD that has been added 
into database. The Free Size of HDD indicates the free space for recording of 
the HDD added in database. The information is read-only. 

5.7.2   

Avail. REC Time > 

The Avail REC Time indicates the available duration for recording. If the unit is 
set to record in circular mode, the item will show “Circular”. The information is 
read-only. 

5.7.3   

Internal / External Disks > 

Select <Internal Disks> or <External Disks> to see information on the storage 
devices connected to the unit. The submenu is displayed as below. 

 

Internal Disks 

Name 
xxx xxxxxxx-xxxxxx 

Active 

YES

Action   

None   

The information of built-in HDD and external storage device will be listed by 
model name and status. If no storage device connects to the unit, the 
message “No Available Items!” will show on screen. 

 

Summary of Contents for XDVR2





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands