background image

 

User’s Manual 

 
 

 

 

 

69

-   

SMTP Server > 

This item enables user to set the SMTP server. Contact your network service 
provider for more specific information. 
 
Follow the steps to setup the SMTP Server. 

  Select <SMTP Server> from SMTP Setup menu and press ENTER. A 

virtual keyboard displays.

 

 

SMTP Server 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A B C D E F G H

I  J K L M

N O P Q R S T U V W X Y Z 

a b c d e  f  g h  i  j  k  l m

n o p q  r  s  t  u v w

x y z 

0 1 2 3 4 5 6 7 8 9 

! @

  _ 

   

 

 

 

 

 

 

 

 

 

 

   

  Backspace   Delete 

   Cancel  OK 

 

 

  Use Direction keys to move the cursor to the wanted character.   

  Press ENTER to add the selected character to the username entry field.   

  When done, move the cursor to <OK> and press ENTER to save the 

settings and exit. 

 

-   

SMTP Port > 

The item is used to change SMTP port to another port, if necessary. SMTP 
usually is implemented to operate over Internet port 25. 
 
To change the SMTP port, move the cursor to <SMTP Port> in SMTP Setup 
menu and press ENTER. Use UP / DOWN keys to change the values in the 
selected field. 
 

Summary of Contents for XDVR2





























































































































Reviews: