User’s Manual
84
5.4.4.4 Event Max PPS >
Event Max PPS is used to set the event recording rate for Event status.
Normally, the Event PPS is set to equal or greater than Normal PPS; the
setting is depending on your application. If the Event PPS is set to <0>,
XDVR2
unit stops recording event video during alarms.
5.4.4.5 Event Size >
The item is used to set the picture size for event status recording. Refer to
Section 5.4.4.3 for the available options.
5.4.4.6 Event Active >
Users are allowed to choose which alarm type needs to be recorded. The
available options are <Alarm> (alarm events), <Motion> (motion detection
events), <Both> (alarm event + motion detection), and <None> (no events
active). The default setting is <Both>, which includes Alarm and Motion event
recording.
5.4.5
ezRecord Setup >
This item aims to avoid the complicated record settings, and to make the
setup much easier. Note that the item can be reached only when you select
<ezRecord> as the option for <Preset Config>.
Select <ezRecord Setup> from <Record Setup> and press ENTER, the
sub-menu appears as below figure:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
The Quality will Be
6 Days
Yes
Yes
Yes
Best
To have the ezRecord Setup done, follow these steps:
•
Select <How Many Days To Record> and press ENTER, then press
UP/DOWN to choose the option you want. The maximum of days depends
on the size of your HDD, in the other words, the larger the HDD installed,
the more days the unit can record.
