Y3K XDVR2 User Manual Download

Page: 52 / 124

User’s Manual

5.1

System Setup >

Select <System Setup> from the Main Menu and press ENTER to enter the
System Setup menu.

System Setup

1. Version
2. Language
3. Date/Time
4. Unit Name
5. Password
6. Network Setup
7. RS485 Setup
8. Audio Output
9. Key Beep

English

DVR

Live/PB

YES

The items in the System Setup menu are described in the following sections.

5.1.1

Version >

The Version menu allows user to view system information such as hardware
and software version. From the System Setup menu, select <Version> and
press ENTER. The following menu is displayed. The first three items are for
read only.

Version

Model Name
Hardware
Software
Software Upgrade via Local Device
Software Upgrade via Internet

****

B2-A1-A5

xxxx-xxxx-xxxx-xxxx

The items in this menu are described in the following subsections.

5.1.1.1 Hardware Version >

The item identifies the hardware version for this unit.

5.1.1.2 Software Version >

The item identifies the software version installed on this unit.

Summary of Contents for XDVR2





























































































































Search results

Summary of Contents for XDVR2

Reviews:

Related manuals for XDVR2

Brands by name

Popular brands

Y3K XDVR2, User Manual

Search results

Summary of Contents for XDVR2

Reviews:

Related manuals for XDVR2

Brands by name

Popular brands