User’s Manual
14
Connecting Short-term Device
If you plan to install any short-term devices to the
XDVR2
and use them as
part of the unit system, such as USB CD-RW, USB Hard Disk Drive, etc. Make
sure connecting those devices only during the unit is powered up. Because
XDVR2
unit can recognize the external devices only after the power-up
process is done completely.
2.4
Rear Panel Connections
There are various connectors on the rear panel used for
XDVR2
installations.
The following figure shows the connectors by name; and followed by the
detailed description of each connector.
Main Monitor (S-Video / BNC)
Both S-Video and BNC output connectors are offered for connecting to a main
monitor. The main monitor displays live image and playback recorded video in
full-screen or split-window format.
Call Monitor (BNC)
The call monitor is used to display full screen video of all installed cameras in
sequence. The BNC call monitor connector allows user to connect the
XDVR2
unit with an optional call monitor.
Video Input
16 BNC connectors are offered for video input streams from installed cameras.
The number of connectors is equal to the number of channels.
