User’s Manual
76
5.3.1
Camera Select >
The item is used to select a camera for setting the parameters. The related
settings will follow the selected camera, such as dome protocol and camera
title.
Move the cursor to <Camera Select> and press ENTER, then select a
channel using UP / DOWN keys.
5.3.2
Dome Protocol >
Select the communications protocol associated with your dome camera using
the ENTER and Direction keys. The available protocol includes <DynaColor>,
<Pelco D>, <Pelco P>, <AD422> and <None> (default).
5.3.3
Dome ID >
This item is used to assign an ID number to the selected dome camera. Note
that ID number must match the ID address set by the dome.
5.3.4
Camera Title >
This item allows the user to change the title of each camera connected to the
unit. By default, the titles of cameras are numbered from 1 through 16
respectively. The title is displayed on screen after the changes of the titles are
set.
